TOSHIBA MINI NOTEBOOK NB305-SP1054L

Change Points

1. Fixed: Horizontal lines appear on the top edge of display while starting Windows 7.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click OK, Unzip then OK again.
5. Click Yes to continue if a User Account Control Window is displayed.
6. Answer the remaining prompts to complete the installation.
7. Restart the computer.

Version Verification

1. Run Device Manager
2. Double-click Display adapters.
3. Double-click Intel(R) Graphic Media Accelerator 3150.
4. Click the Driver tab.
5. Verify that the Driver Version is V8.14.10.2108.

Change History

• Version 1.10 - 2009-12-01
  • Initial production BIOS for these models.

Change History

• Version 1.20 - 2009-12-18
  • Fixed: Fail message in the USB Sleep and Charge Function.
  • Fixed: Event Log error (HAL).
  • Added a check to prevent BIOS updates when power is lost.
  • Added a dynabook logo switch function.
  • Added a workaround for the Atheros HB95.
  • Modified the GPIO's default setting to Mode 3.
  • Modified the USB_CHG_EN# low pulse timing.
  Version 1.10 - 2009-12-01
  • Initial production BIOS for these models.

Change History

• Version 1.30 - 2010-01-25
  • Added: Computrace support for Toshiba Canada (TCL) models.
  • Modified the 1.83 GHz CPU speed string.
  Version 1.20 - 2009-12-18
  • Fixed: Fail message in the USB Sleep and Charge Function.
  • Fixed: Event Log error (HAL).
  • Added a check to prevent BIOS updates when power is lost.
  • Added a dynabook logo switch function.
  • Added a workaround for the Atheros HB95.
  • Modified the GPIO's default setting to Mode 3.
  • Modified the USB_CHG_EN# low pulse timing.
  Version 1.10 - 2009-12-01
  • Initial production BIOS for these models.

Release Notes

Release Notes

• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key to load setup defaults.
• Press the F10 function key to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.50 - 2010-05-26
  • Modified a French string in the BIOS Setup menu.
  • Fixed: USB drive is undetectable after flashing the BIOS.
  • EC-150: Fixed: The lower limit value of the remaining battery life is not correct after recovery.
  • Note: BIOS V1.50 and higher support DDR2 and DDR3 memory. Previous versions only support DDR2 memory.
  Version 1.40 - 2010-03-24
  • Updated the MRC from 1.0 to 1.12.
  Version 1.30 - 2010-01-25
  • Added: Computrace support for Toshiba Canada (TCL) models.
  • Modified the 1.83 GHz CPU speed string.
  Version 1.20 - 2009-12-18
  • Fixed: Fail message in the USB Sleep and Charge Function.
  • Fixed: Event Log error (HAL).
  • Added a check to prevent BIOS updates when power is lost.
  • Added a dynabook logo switch function.
  • Added a workaround for the Atheros HB95.
  • Modified the GPIO's default setting to Mode 3.
  • Modified the USB_CHG_EN# low pulse timing.
  Version 1.10 - 2009-12-01
  • Initial production BIOS for these models.

Change Points

1. Fixed: DPC x133 Watchdog issue.
2. Improved: AV quality.
3. Improved: Connection reliability.

Installation

1. Note: Install Intel Wireless Display version 3.5.41.02 or higher in conjunction with this update.
2. Save the file to a convenient location such as the Windows Desktop.
3. Save all work in progress and close open applications.
4. Double-click the downloaded file.
5. Click Start at the TOSHIBA Archive Extractor window.
6. If a User Account Control window is displayed click Yes.
7. Click Next at the Intel PROSet/Wireless Software window.
8. Click Next again.
9. Click "I accept the terms in the license agreement" then click Next.
10. Click Typical or Custom.
11. Click Install.
12. Click Finish.
13. Restart the computer.

Change points from the last released version (2.1.40):

1. Fixed: Toshiba Service Station crashes causing the "Service Station has stopped working" error message.
2. Added Chinese translations.
3. Added code to downsize the TSS window when it is too large to fit in the display.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
   1. If a User Account Control message is displayed, click Continue.
   2. Answer the displayed prompts to complete the installation.
   3. Restart the computer.

Change Points

1. Changes were made to improve the TOSHIBA Media Controller Digital Media Renderer (DMR) function. Version 1.0.80.3 has more logic for detecting correct/reasonable content for North American Toshiba REGZA TVs purchased in 2009, and later.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click Start at the TOSHIBA Archive Extractor window.
5. Click Yes if a User Account Control window is displayed.
6. Click Continue to start the installer program.
7. Click Next to start the installation, and Next again to finish.

Version Verification

1. Open Control Panel, Programs and Features, then click Uninstall a program.
2. Scroll down to TOSHIBA Media Controller.
3. Verify that the version is 1.0.80.3.32.

Change Points

1. Changes were made to improve the TOSHIBA Media Controller Digital Media Renderer (DMR) function. Version 1.0.80.3 has more logic for detecting correct/reasonable content for North American Toshiba REGZA TVs purchased in 2009, and later.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click Start at the TOSHIBA Archive Extractor window.
5. Click Yes if a User Account Control window is displayed.
6. Click Continue to start the installer program.
7. Click Next to start the installation, then Finish when completed.

Version Verification

1. Open Control Panel, Programs and Features, then click Uninstall a program.
2. Scroll down to TOSHIBA Media Controller.
3. Verify that the version is 1.0.80.3.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click Start at the TOSHIBA Archive Extractor window.
5. Click Yes if a User Account Control window is displayed.
6. The program will complete quickly.
7. Restart the computer.
8. Toshiba Utilities will work normally again.

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Service Station Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00398200D.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Toshiba Service Station 2.1.14 is applied successfully, the message below will be shown.

This is a Bluetooth Stack for Windows by Toshiba update

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Bluetooth Stack Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00636200a.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Bluetooth Stack for Windows by Toshiba v9.10.32(T) is applied successfully, the message below will be shown. Click Yes to restart the system.

LAPTOP CHECKUP

Laptop Checkup will check for:

• Issues that may be slowing down your laptop.
• Data, photos and music files that need backup.
• Viruses, spyware, malware and other threats.

To open Laptop Checkup:

1. Click the Start menu.
2. Enter "Laptop" into the search field.
3. Click "Toshiba Laptop Checkup" in the search results.
4. If this utility has not been used, it will automatically launch and install.
   
5. Laptop Checkup will open allowing you to perform maintenance functions on your laptop to keep it running at peak performance.
   

Change Points

1. Fixed: DPC x133 Watchdog issue.
2. Improved: AV quality.
3. Improved: Connection reliability.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click the Start button when the Toshiba Archive Extractor window is displayed.
5. Click Yes if a User Account Control Window is displayed.
6. Follow the displayed instructions to complete the install.

APP PLACE

Because our apps are cloud based, you don’t need to download them to your computer. Instead you access them through the Internet. They save your valuable hard drive space; you always have the latest, most up-to-date software version. Your apps are virtually always available to you, anytime, from anywhere.

To make it easier, we’ve grouped our apps onto four main packages specially designed to work for you and your Toshiba laptop.

• Road Warrior - All your things with you wherever you are.
• Family CEO - Your household organized, Your memories kept.
• The Essentials - The essential apps that make any device complete.
• Student life 101 - Balancing your busy student life. 

To open TOSHIBA App Place:

Click on the Blue App Place icon in the task bar (if present).

OR

1. Click the Start menu.
2. Enter "App" into the search field.
3. Click "Toshiba App Place" in the search results.
4. Toshiba App Place web page will open. Sign in using your existing account or create a new account in the upper Right corner.
   
5. To learn more about Toshiba App Place, CLICK HERE.

***NOTE*** This software package is part of the pre-installed software for the applicable products.

Change points:

1. Fixed: System crashes after login.
2. Improved package downloads by using the Binary Intelligent Transfer Service (BITS).
3. Combined the Download and Install buttons.
4. Added a Home Link to the Settings Page.
5. Removed the Notification Level Setting.
6. Deletes obsolete software - i.e. Software that was already downloaded and installed.
7. Notification message improvements.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Answer the displayed prompts to complete the installation.

Change Points

1. Fixed: Localization issues on non-English operating systems.
2. Improved: Intermittently displays "not responding".
3. Improved: AV quality.
4. Improved: Connection reliability.
5. Fixed: Yellow bang in Device Manager when the calendar date is later than Jan 1st 2013.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click the Start button when the Toshiba Archive Extractor window is displayed.
5. Click Start at the TOSHIBA Archive Extractor window.
6. Click Yes if a User Account Control window is displayed.
7. Click Upgrade at the Intel(R) WiDi window.
8. Click "I accept the terms in the license agreement" then click Next.
9. Click Finish.
10. Click Yes to restart the computer.

Version Verification

1. In Control Panel, Programs and Features:
2. Verify that the Intel (R) WiDi version is 3.5.41.0.

Change Points

1. Fixed: Localization issues on non-English operating systems.
2. Improved: Intermittently displays "not responding".
3. Improved: AV quality.
4. Improved: Connection reliability.
5. Fixed: Yellow bang in Device Manager when the calendar date is later than Jan 1st 2013.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click the Start button when the Toshiba Archive Extractor window is displayed.
5. Click Start at the TOSHIBA Archive Extractor window.
6. Click Yes if a User Account Control window is displayed.
7. Click Upgrade at the Intel(R) WiDi window.
8. Click "I accept the terms in the license agreement" then click Next.
9. Click Finish.
10. Click Yes to restart the computer.

Version Verification

1. In Control Panel, Programs and Features:
2. Verify that the Intel (R) WiDi version is 3.5.41.0.

Release Notes

• For CD-ROM BIOS updates in Windows 8 models: (1) Shut down the system while pressing the SHIFT key to completely power off. (2) Power on while pressing F2 to enter the BIOS Setup Menu. (3) Go to the Security tab and set the "Secure Boot" setting to "Disabled". (4) Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot." (5) Press F10 to save and exit. (6) Boot from the BIOS CD-ROM and type FLASH or BIOS at the C:\\ prompt. (7) After the BIOS update has completed, restore the Boot Mode setting to "UEFI Boot" and the Secure Boot setting to Enabled.
• For CD-ROM BIOS updates in Windows 7 models: Type FLASH or BIOS then press enter at the C:\\ prompt.
• For all updates: The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
• Power on the computer if it is off.
• While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 6.40 - 2012-12-04
  • Modified: Made a change to the LID power setting.
  • Updated - Win7: CPU Microcode M12206A7 to version 00000028.
  Version 6.30 - 2012-11-19
  • Updated: CPU Microcode M12306A9 to version 00000015.
  Version 6.20 - 2012-09-11
  • Fixed: When system memory is 2GB, OS recovery will fail.
  Version 6.10 - 2012-09-07
  • Fixed: TOSHIBA ACPI sub function 0169h returns USB 3.0 support.
  Version 6.00 - 2012-08-27
  • Updated: BIOS and EC versions to 6.00.
  Version 1.90 - 2012-07-27
  • Updated: ME: ME8_1.5M_8.1.0.1248.
  • Added: PCH NM70 device ID.
  • Implemented changes for the Windows 8 upgrade.
  Version 1.80 - 2012-06-26
  • Modified: Sandy Bridge CPUs only support a DDR3 maximum frequency of 1333MHz.
  • Modified: Synchronized the CRID function with the PCH RC code.
  • Added: Windows 8 string.
  • Updated: VBIOS to fix a BSOD 0x116 issue on discrete SKUs.
  Version 1.70 - 2012-06-20
  • Modified: DDR3 1066 is no longer supported on the Chief-River platform with an Ivy Bridge CPU.
  Version 1.60 - 2012-06-11
  • Added: i3-2328M CPU support.
  Version 1.50 - 2012-04-19
  • Updated: Intel reference code.
  • Updated: Microcode.
  • Initial production BIOS release for these models.
  Version 1.40 - 2012-04-12
  • Updated: PPT RC code.
  • Modified: CMOS timer behavior.
  • Updated: Intel reference code.
  • Initial production BIOS release for these models.
  Version 1.20 - 2012-03-01
  • Modified: Updated to disable C7r as a BIOS default to avoid potential C7r system hangs.
  • Initial production BIOS release for these models.
  Version 1.00 - 2012-02-24
  • Initial production BIOS for these models.

Change Points

1. Eliminates the following error after updating the Adobe Flash Player to version 11.2.202.235: "The Adobe Flash Player installed on your PC is not supported by TOSHIBA Media Controller Plug-in. TOSHIBA Media Controller Plug-in failed to start.
   This error occurs when attempting to forward movie play back to an external display.

Install Instructions

1. Save the downloaded file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click Start when the TOSHIBA Archive Extractor window is displayed.
5. Click Yes to continue if a User Account Control window is displayed.
6. Click Next at the TOSHIBA Media Controller Plug-in InstallShield Wizard.
7. Click Install to start the installation.
8. Click Finish to complete the installation.

Version Verification

1. Click Start, type Add or Remove Programs, then press Enter.
2. Verify that the TOSHIBA Media Controller Plug-in application is version 1.0.8.0.

Change Points

1. Fixed: DPC x133 Watchdog issue.
2. Improved: AV quality.
3. Improved: Connection reliability.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click the Start button when the Toshiba Archive Extractor window is displayed.
5. Click Yes if a User Account Control Window is displayed.
6. Follow the displayed instructions to complete the install.

Change Points

1. Fixed: DPC x133 Watchdog issue.
2. Improved: AV quality.
3. Improved: Connection reliability.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click the Start button when the Toshiba Archive Extractor window is displayed.
5. Click Yes if a User Account Control Window is displayed.
6. Follow the displayed instructions to complete the install.

Release Notes

• For CD-ROM BIOS updates in Windows 8 models: (1) Shut down the system while pressing the SHIFT key to completely power off. (2) Power on and press F2 while the TOSHIBA logo is displayed to enter the BIOS Setup Menu. (3) Go to the Security tab and set the "Secure Boot" setting to "Disabled". (4) Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot." (5) Press F10 to save and exit. (6) Boot from the BIOS CD-ROM. (7) Type BIOS at the C:\\ prompt then press Enter. (7) After the BIOS update has completed, restore the Boot Mode setting to "UEFI Boot" and the Secure Boot setting to Enabled.
• For CD-ROM BIOS updates in Windows 7 models: (1) Boot from the BIOS CD-ROM. (2) Type BIOS at the C:\\ prompt then press Enter.
• For all updates: The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 6.30 - 2012-11-19
  • Updated: CPU Microcode M12306A9 to version 00000015.
  Version 6.20 - 2012-09-11
  • Fixed: When system memory is 2GB, OS recovery will fail.
  Version 6.10 - 2012-09-07
  • Fixed: TOSHIBA ACPI sub function 0169h returns USB 3.0 support.
  Version 6.00 - 2012-08-27
  • Updated: BIOS and EC versions to 6.00.
  Version 1.90 - 2012-07-27
  • Updated: ME: ME8_1.5M_8.1.0.1248.
  • Added: PCH NM70 device ID.
  • Implemented changes for the Windows 8 upgrade.
  Version 1.80 - 2012-06-26
  • Modified: Sandy Bridge CPUs only support a DDR3 maximum frequency of 1333MHz.
  • Modified: Synchronized the CRID function with the PCH RC code.
  • Added: Windows 8 string.
  • Updated: VBIOS to fix a BSOD 0x116 issue on discrete SKUs.
  Version 1.70 - 2012-06-20
  • Modified: DDR3 1066 is no longer supported on the Chief-River platform with an Ivy Bridge CPU.
  Version 1.60 - 2012-06-11
  • Added: i3-2328M CPU support.
  Version 1.50 - 2012-04-19
  • Updated: Intel reference code.
  • Updated: Microcode.
  • Initial production BIOS release for these models.
  Version 1.40 - 2012-04-12
  • Updated: PPT RC code.
  • Modified: CMOS timer behavior.
  • Updated: Intel reference code.
  • Initial production BIOS release for these models.
  Version 1.20 - 2012-03-01
  • Modified: Updated to disable C7r as a BIOS default to avoid potential C7r system hangs.
  • Initial production BIOS release for these models.
  Version 1.00 - 2012-02-24
  • Initial production BIOS for these models.

Release Notes

• For CD-ROM BIOS updates in Windows 8 models: (1) Shut down the system while pressing the SHIFT key to completely power off. (2) Power on while pressing F2 to enter the BIOS Setup Menu. (3) Go to the Security tab and set the "Secure Boot" setting to "Disabled". (4) Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot." (5) Press F10 to save and exit. (6) Boot from the BIOS CD-ROM and type FLASH or BIOS at the C:\\ prompt. (7) After the BIOS update has completed, restore the Boot Mode setting to "UEFI Boot" and the Secure Boot setting to Enabled.
• For CD-ROM BIOS updates in Windows 7 models: Type FLASH or BIOS then press enter at the C:\\ prompt.
• For all updates: The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
• Power on the computer if it is off.
• While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 6.50 - 2012-12-27
  • Updated - Win8: Discrete VBIOS and GOP.
  • Updated - Win7: Discrete VBIOS.
  Version 6.50 - 2012-12-27
  • Updated - Win8: Discrete VBIOS and GOP.
  • Updated - Win7: Discrete VBIOS.
  Version 6.40 - 2012-12-04
  • Modified: Made a change to the LID power setting.
  • Updated - Win7: CPU Microcode M12206A7 to version 00000028.
  Version 6.30 - 2012-11-19
  • Updated: CPU Microcode M12306A9 to version 00000015.
  Version 6.20 - 2012-09-11
  • Fixed: When system memory is 2GB, OS recovery will fail.
  Version 6.10 - 2012-09-07
  • Fixed: TOSHIBA ACPI sub function 0169h returns USB 3.0 support.
  Version 6.00 - 2012-08-27
  • Updated: BIOS and EC versions to 6.00.
  Version 1.90 - 2012-07-27
  • Updated: ME: ME8_1.5M_8.1.0.1248.
  • Added: PCH NM70 device ID.
  • Implemented changes for the Windows 8 upgrade.
  Version 1.80 - 2012-06-26
  • Modified: Sandy Bridge CPUs only support a DDR3 maximum frequency of 1333MHz.
  • Modified: Synchronized the CRID function with the PCH RC code.
  • Added: Windows 8 string.
  • Updated: VBIOS to fix a BSOD 0x116 issue on discrete SKUs.
  Version 1.70 - 2012-06-20
  • Modified: DDR3 1066 is no longer supported on the Chief-River platform with an Ivy Bridge CPU.
  Version 1.60 - 2012-06-11
  • Added: i3-2328M CPU support.
  Version 1.50 - 2012-04-19
  • Updated: Intel reference code.
  • Updated: Microcode.
  • Initial production BIOS release for these models.
  Version 1.40 - 2012-04-12
  • Updated: PPT RC code.
  • Modified: CMOS timer behavior.
  • Updated: Intel reference code.
  • Initial production BIOS release for these models.
  Version 1.20 - 2012-03-01
  • Modified: Updated to disable C7r as a BIOS default to avoid potential C7r system hangs.
  • Initial production BIOS release for these models.
  Version 1.00 - 2012-02-24
  • Initial production BIOS for these models.

Release Notes

• The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.90 - 2012-07-27
  • Updated: ME: ME8_1.5M_8.1.0.1248.
  • Added: PCH NM70 device ID.
  • Implemented changes for the Windows 8 upgrade.
  Version 1.80 - 2012-06-26
  • Modified: Sandy Bridge CPUs only support a DDR3 maximum frequency of 1333MHz.
  • Modified: Synchronized the CRID function with the PCH RC code.
  • Added: Windows 8 string.
  • Updated: VBIOS to fix a BSOD 0x116 issue on discrete SKUs.
  Version 1.70 - 2012-06-20
  • Modified: DDR3 1066 is no longer supported on the Chief-River platform with an Ivy Bridge CPU.
  Version 1.60 - 2012-06-11
  • Added: i3-2328M CPU support.
  Version 1.50 - 2012-04-19
  • Updated: Intel reference code.
  • Updated: Microcode.
  • Initial production BIOS release for these models.
  Version 1.40 - 2012-04-12
  • Updated: PPT RC code.
  • Modified: CMOS timer behavior.
  • Updated: Intel reference code.
  • Initial production BIOS release for these models.
  Version 1.20 - 2012-03-01
  • Modified: Updated to disable C7r as a BIOS default to avoid potential C7r system hangs.
  • Initial production BIOS release for these models.
  Version 1.00 - 2012-02-24
  • Initial production BIOS for these models.